Γ andX bandgap hydrostatic deformation potentials for epitaxial In0.52Al0.48As on InP(001)

The pressure dependence of the direct and indirect bandgap of epitaxial In_0.52Al_0.48As on InP(001) substrate has been measured using photoluminescence up to 92 kbar hydrostatic pressure. The bandgap changes from Γ toX at an applied pressure of ∼ 43 kbar. Hydrostatic deformation potentials for both the Γ andX bandgaps are deduced, after correcting for the elastic constant (bulk modulus) mismatch between the epilayer and the substrate. For the epilayer we obtain and+(2.81±0.15)eV for the Γ andX bandgaps respectively. From the pressure dependence of the normalized Γ-bandgap photoluminescence intensity a Γ-X lifetime ratio, (τ_Γ/τ _X ), of 4.1×10⁻³ is deduced.     

聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.     

Thermal coefficient of linear expansion of non-crystalline chalcogenides in the As-S-Se-Te-I system

The object of the paper is an investigation of the glasses of the (As₂S₃)_x(AsSe_0.5Te_0.5I)_100-x. type for 65≤;x≤;95, using methods of thermomechanical analysis. Values of the thermal coefficients of linear expansion in solid and visco-plastic phase were determined. it was shown that introducing arsenic-sulfide in glass-matrix AsChI, i.e. (AsSe_0.5Te_0.5I), leads to an increasing stability of these glasses. The characteristic temperatures of softening Tg and the temperature of the beginning of deformation t_w increase by increasing content of As₂S₃. The analytical forms of dependence of four significant physical values α_g, α_l, Tg, Tw, as a function of As₂S₃ content in the structure of glasses were fitted. This revised version was published online in July 2006 with corrections to the Cover Date.     

β晶型聚丙烯塑性形变过程中的形态变化

β晶型聚丙烯塑性形变过程中的形态变化沈静姝，任宏燕，况勋（中国科学院化学研究所高分子物理开放实验室，北京，１０００８０）史观一（中国科学院上海有机所，上海，２０００３２）关键词β晶型聚丙烯，塑性形变，形态全同立构聚丙烯的分子链都是３；螺旋链，但其晶体...     

Sorption of water vapor on cation-substituted vermiculite

Deformations of Na, Ca, and Ba vermiculites upon sorption of water vapor have been determined by a dilatometric method. Sequential stages in the hydration of interlayer exchange cations have been identified. The experimental results have been compared with data obtained in studies using adsorptive, calorimetric, and x-ray methods.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Institute of Colloid Chemistry and the Chemistry of Water, Academy of Sciences of the Ukraine, Kiev. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 34–39, January, 1992.     

苯并三氮唑及其羧酸酯衍生物对铜缓蚀机理的分子动力学模拟研究

用分子动力学(MD)方法, 模拟计算了5种铜缓蚀剂[苯并三氮唑(BTA)、苯并三氮唑-5-羧酸甲酯(MBTC)、苯并三氮唑-5-羧酸丁酯(BBTC)、苯并三氮唑-5-羧酸己酯(HBTC)、苯并三氮唑-5-羧酸辛酯(OBTC)]与Cu₂O晶体的相互作用. 结果发现, 中性条件下缓蚀剂分子与Cu₂O晶体的结合能均大于酸性条件下的数值, 但两种条件下结合能的大小排序均为OBTC＞HBTC＞BBTC＞MBTC＞BTA. 对体系各种相互作用以及对关联函数g(r)的分析表明, 体系结合能主要由库仑作用提供, Cu₂O晶体中的Cu原子与缓蚀剂分子中的N原子之间形成了配位键. 在与Cu₂O(001)晶面结合过程中, BTA及其衍生物分子发生了扭曲变形, 但形变能远小于体系的非键相互作用能.     

Deformation calorimetry of polyurethane block-copolymers

A thermodynamic analysis of the uniaxial stretching of polyurethanes of various compositions and mechanical histories was carried out by using deformation calorimetry. The initial small strain deformations were found to result from the volume elasticity of the hard phase. The intramolecular energy contributions of the soft blocks were estimated. The hard block contributions were shown to depend on their content and on the degree of sample stretching. The predominant role of the soft component is proved to be manifested only in softened samples with a hard block content not exceeding 30%. The thermodynamics of the softening and hysteresis phenomena were studied. The dependence of the deformation mechanism on the hard block content and mechanical history is discussed.The authors express their thanks to Dr. A. R. Korigodsky and Dr. M. P. Letunovsky for the PU samples.     

Electron density distribution in potassium bis -(carbonato)cuprate(II)

The electron density distribution in potassiumbis-(carbonato)cuprate(II) has been analyzed using x-ray diffraction data from an earlier structure determination. While the copper-ligand geometry is close to square planar the deformation density near the metal is strongly asymmetric. There are local maxima near the copper atom along the line of the Cu-K vectors. These resemble features found in corresponding regions in normal length metal-metal bonds. The observation is consistent with the long range nature of the Coulomb potential associated with the potassium ion.     

Plastic deformation and performance of engineering polymer materials

The plastic deformation mechanism operating in polymer glasses is analyzed. The whole process consists of two main stages: nucleation of special shear defects, called PSTs (plastic shear transformations), and their disappearance. The important feature of plastic deformation of glasses is the storage of a large amount of internal energy ΔU_def upon straining. Such energy storage is the critical issue for mechanical performance of polymeric material: if the amount of stored energy is high, the appearance of macroscopic failure is very probable while glassy materials collecting a small amount of stored deformation energy are quite ductile. It is proposed that the rate of disappearance of PSTs is a key factor in dissipation of stored deformation energy. A parameter describing the dissipation ability of material upon deformation is introduced.     

细观等效理论预测再生混凝土宏观力学参数北大核心CSCD

预测分析再生混凝土各组分对再生混凝土宏观力学参数的影响是开展再生混凝土基本力学性能的一种方式.为了分析再生混凝土各组分对再生混凝土宏观力学参数的影响,根据再生混凝土的细观结构组成,建立了细观等效模型,利用扭转变形、细观夹杂理论、弹性等效思想和M-T模型方法,推导了由原生骨料、老界面层、老水泥砂浆、新界面层和新水泥砂浆等组成的再生混凝土的宏观力学参数预测模型.预测结果表明,随着再生骨料的取代率增加,水泥砂浆的含量不断增加,再生混凝土孔隙率也随之增大,导致再生混凝土的Poisson比随之增大,弹性模量、剪切模量和体积模量不断降低.模型的预测结果较好地反映了再生混凝土宏观力学参数随再生骨料取代率的增加不断变化的这一趋势,也为再生混凝土宏观力学参数的预测提供了一条简单实用的新方法,有利于再生混凝土基本力学性能的研究分析.